What factors affect the normal use of gas detector

If the gas detector is installed, it should be able to play a normal detection function. However, some factors will affect the normal use of the gas detector.
 
1. Equipment selection
When choosing equipment, we must choose instruments with stable performance, accurate detection, fast and sensitive. Only by selecting appropriate and regular equipment can we ensure the normal detection work.
 
2. Installation position
The location of gas detectors is very complex. Water pump room, water tank , wharf, oil tank, furnace and other places where fuel may leak. Gas detectors need to be reasonably configured in these places. Moreover, the installation position can be divided into internal and external. In the open-air workplace, due to the special environment, it is necessary to not only select the installation position, but also install protective equipment such as rain cover to ensure the normal use of gas detector.
 
3. Maintenance
In the process of using the gas detector, it is inevitable for all kinds of polluting gases and dust in the environment to enter the detector. The damage to the working conditions of the detector caused by these polluting gases and dust also exists objectively. In fact, the gas detector installed outdoors often causes errors or does not detect due to poor maintenance. In the process of use, we need to maintain the gas detector regularly.
 
4. Nonstandard construction process
The construction process is not standardized. For example, the gas detector is not set near the place where the equipment is easy to leak combustible, toxic and harmful gases, or is set adjacent to the exhaust fan during installation, and the leaked combustible, toxic and harmful gases cannot be fully diffused near the gas detector, so that the leakage risk cannot be detected by the gas detector in time. If the construction process is not standardized, the gas detector will detect faults during use.
 
 
Moreover, the gas detector shall be reliably grounded during construction, and the detector shall not fall or be thrown to the ground. Commissioning shall be carried out after construction to ensure that the combustible gas alarm is in normal working state.
 
 
Henan Chicheng Electric Co., Ltd. focuses on the production of gas detection alarms and has an independent R & D team. The gas detection alarms produced have good performance, reliable quality and complete functions. They have become the choice of many industrial and commercial places and tens of millions of families. Welcome to click and consult online customer service for free.