There are many reasons for the failure and damage of gas detectors. In order to ensure that the instrument can perform as it should within the established service life, the following matters need special attention during its use: Pay attention to the measuring range of the instrument. Any gas detector has a fixed detection range. Measurement can only be completed within this range, and the upper limit of gas measurement should be far higher than the highest concentration that may occur in actual applications.
Pay attention to the service life of the sensor: Gas detectors have their service life, and aging will occur even if they are not used frequently. Therefore, be sure to read the instructions in detail before use to avoid using the sensor after it expires.
Pay attention to regular calibration, testing and maintenance: Through regular calibration and testing, potential problems of gas detectors can be discovered in time to avoid escalating problems into serious consequences. At the same time, targeted maintenance and maintenance are carried out to ensure that it can work normally and respond to various critical situations.
Correct use and storage: Avoid overloading the equipment in extreme environments, such as long-term operation under high temperature or high humidity conditions; use protective covers or storage boxes to store the equipment to prevent accidental damage.
How to choose a high-quality portable gas detector?
Portable gas detectors are small, light, and easy to carry. They can detect gas concentrations at different locations anytime and anywhere. Once the concentration of the gas to be tested reaches or exceeds the preset value, the instrument will immediately send out sound, light, and vibration alarm signals to remind people to evacuate urgently or take emergency measures to prevent accidents.
So, how should we choose from a wide variety of portable gas detectors?
When purchasing a portable gas detector, you can consider the following key factors:
01 Type of gas to be detected: Determine the specific type of gas you need to detect and ensure that the detector can detect toxic and harmful gases in the environment.
02 Sensitivity and accuracy: Select a detector with appropriate sensitivity and accuracy according to actual needs to ensure accurate detection of gas concentration.
03 Response time: A fast response time is very important for timely detection of gas leaks or concentration changes.
04 Reliability and stability: Choose products with reliable quality and stable performance to avoid frequent failures and false alarms.
05 Protection level: Select a detector with an appropriate protection level according to the use environment, such as waterproof and dustproof.
06Ease of use and operation: Consider the user-friendly interface, simplicity of operation, and whether the data is easy to read and understand.
07Calibration and maintenance: Understand the calibration method and maintenance requirements of the detector to ensure that calibration and maintenance can be performed regularly.
08Brand and after-sales service: Choose products from well-known brands and understand their after-sales service and technical support.
09Additional functions: Some detectors may have additional functions, such as data logging, alarm functions, etc., which should be selected according to actual needs.
10Portability: The design of portable gas detectors should be compact, lightweight, easy to carry and operate. The lightweight body design is not only convenient for staff to use in various environments, but also improves work efficiency.
11Battery life: Battery life is crucial for portable devices. Long-term work requires the equipment to have sufficient battery capacity and an efficient energy management system to ensure that the detection will not be affected by power exhaustion during long-term use.
Chicheng Electric Gas Detector is safer to use: Chicheng Electric has been focusing on the field of gas detection for 21 years and specializes in the research and development, production and sales of gas environment safety monitoring products. Its main products are intelligent instruments, alarm control systems and supporting equipment, intelligent sensors, etc. in the field of gas environment safety monitoring. They are mainly used in many industrial fields such as petroleum, chemical industry, gas, metallurgy, electricity, medicine, food, and urban public places, household civil use, underground integrated pipe corridors, etc.
Chicheng Electric has single-type gas detectors and composite gas detectors. The instruments have a smooth appearance, ergonomic design, small and light, and easy to carry. The instrument protection level reaches up to IP67, which can effectively prevent dust, water and explosion. And the instrument has strong endurance and is suitable for many types of places.
》》》Instrument recommendation
GC510 portable gas detector
◆It has two styles: pump suction and probe gun;
◆Imported sensors, fast sampling speed;
◆High-strength ABS engineering plastics, waterproof, dustproof, anti-slip, explosion-proof;
◆2800mA rechargeable lithium battery, ultra-long standby.
GC310 composite gas detector
◆Supports detection of 1, 2, 3, or 4 gases;
◆Triple alarm of sound, light, and vibration;
◆Small and light body, sturdy and resistant to falling;
◆Waterproof, dustproof, explosion-proof, suitable for use in limited spaces.
GC610 composite gas detector
◆Can detect leakage concentrations of 6 gases at the same time;
◆High-sensitivity sensor, high precision, fast response;
◆360-degree safety anti-fall protection design, resistant to falling and durable;
◆Complete qualifications, can effectively prevent dust, water, and explosion.
21 years of ingenuity, protecting gas environment safety! Chicheng Electric will always pay attention to user needs, increase innovation and research and development, and contribute to protecting gas environment safety in various fields!
