The gas detector is a precision machine, which can detect the gas environment in the plant in real time and protect the life safety of personnel in the plant. However, precision machinery often needs to be properly maintained, but this problem has not been paid attention to by factories and enterprises, resulting in a variety of problems in the later use of gas detector, affecting its normal work.
In fact, mastering the correct method of maintaining the gas detector can not only ensure the detection accuracy of the gas detector, but also prolong its service life.
Industrial gas detectors can be divided into portable and fixed types.
● Maintenance method of portable gas detector:
1. Keep the detector dry and away from moisture, rain and corrosive liquids;
2. Try to reduce the use frequency of the detector in the situation of dust and poor environment;
3. The detector shall be stored in a clean and normal temperature place, and it is better not to store the detector in a high temperature or cold place;
4. Handle with care. Do not fall, knock or shake the detector. Rough use will damage the instrument;
5. When cleaning the detector, gently wipe the instrument with a clean cotton ball dipped in a little water or soapy water and dry it in time. The filter of the detection hole should also be kept clean. If the liquid flows into the detection hole, the instrument can be inverted to make the liquid flow out by itself. Do not shake the instrument violently;
6. Please use the charger provided or approved by the company to charge the tester, otherwise it will cause damage to the instrument;
7. If the tester does not operate normally, do not disassemble it by yourself. Please contact the company’s dealer for maintenance in time.
● Maintenance method of fixed gas detector:
1. Regular calibration, test and inspection shall be conducted for the maintenance of fixed gas detector. Generally, the calibration frequency is once a year;
2. During installation, the detector shall not be close to the wall, and enough space shall be reserved around it for daily maintenance and troubleshooting;
3. Keep the tester clean and wipe the surface of the tester with a soft wet cloth;
4. Ensure that the detector is dry;
5. Keep the filter screen of the sensor clean, clean the surface dirt with a soft and clean brush, wipe it with warm water, and cover it again after the filter screen is dried;
6. When cleaning the sensor, only clean the sensor with a clean brush, and do not clean it with water;
7. Avoid exposing the sensor to the odor generated by inorganic solvents or organic solvents as much as possible, so as to reduce the service life and detection accuracy of the sensor.
Nowadays, gas detector is paid more and more attention in industrial safety production, and its mysterious veil is slowly unveiled to the public. Facing more demands and higher requirements, the industrial portable composite multi gas detector GC310 and fixed gas detector QB10n independently developed by Chicheng Electric can better meet the actual needs of users in terms of sensitivity, stability, detectable gas diversity and later service. Among them, the compound multi gas detector gc310 can detect up to four kinds of gases at the same time, and has the function of automatic temperature compensation. The shell is firm, durable and shockproof. It is more suitable for people with relatively complex working environment to measure gases.
Whether it is the early distribution, installation precautions, or later maintenance of the gas detector, it is to enable the gas detector to monitor the gas environment for the factory and enterprise more long and accurately, and always protect the life safety of operators and the property safety of the factory. Chi Cheng Electric is an unbreakable gas safety umbrella. As long as Chi Cheng is here, safety must be there.
