Gas stove frequent flame out? What are the reasons?

The gas stove in the kitchen is no stranger to everyone. Once used for a long time, there will be automatic flameout. Even if you can hit the fire, but release the fire switch immediately extinguished, really annoying.
 
Today I'll explain why the gas stove will appear automatic flameout, these are a few reasons to pay attention!
 
Ignition press time is too short
 
Pressing time is too short, the thermocouple can not feel the flame temperature, it will be in the ignition and then automatically extinguished.
 
Correct operation: first press down the knob, and then rotate, rotate 3 to 5 seconds after the release, you can solve the problem.
 
Stove bottom battery needs to be replaced
 
Whether the battery is charged is also one of the reasons for the stove to go out frequently.
 
Correct operation: just remove the battery and reinstall it or replace it with a new one.
 
Water and oil stains on the bottom of the cooker
 
The bottom of the cookware is broken or has oil and dirt, which flows into the gas stove and causes the flame to go out.
 
Correct operation: Check the integrity of the cookware before use or clean the cooker with oil and dirt and then light the fire.
 
Clogged fire cover
 
A clogged lid may also cause the flame to go out automatically.
 
Correct operation: After closing the gas meter front valve and stove front valve, disassemble the stove head one by one, use a toothpick and other pointed objects to unclog the small fire cover and clean the foreign matter inside.
 
Dirty thermocouple
 
A dirty thermocouple may cause the flame temperature not to be felt and go out.
 
Correct operation: use a rag or sandpaper to clean the golden thermocouple next to the fire cover to restore normal.
 
Too much wind blowing out the flame
 
When the gas stove is on a small fire, the fire may be blown out due to too much wind from opening and closing the cabinet.
 
Correct operation: open and close the cabinet door lighter and slower.
 
If the above reasons have been investigated, still can not determine the cause of the failure, it is not recommended to do their own hands directly disassemble the stove to prevent gas leakage caused by dangerous. Professional after-sales personnel should be contacted to deal with it at home.
 
The hazards of frequent flame out of the stove
 
When the flame is accidentally extinguished by wind, soup and water, etc., it is easy to trigger a gas leak, and if no one finds it, if the gas fills the whole room, a slight encounter with an open flame will result in the danger of combustion, fire, or even explosion.
 
Gas stove correct ignition operation
 
Ignition of this action may seem simple, but there are still some details to pay attention to, such as knob pressure is not in place, knob rotation angle is not in place, these may lead to ignition failure, hand loose on the flame out.
 
Method of operation: It is recommended to open the gas stove when the knob is pressed down to the bottom, rotate 90 degrees counterclockwise, steady pressure for about 3 seconds, then release the hand, according to the correct method can be ignited.
 
To prevent gas leaks caused by frequent gas stove flameout, Chicheng Electric recommends that residents buy gas stoves with flameout protection devices, and install gas leak alarms, solenoid valves, self-closing valves and other safety protection products in the home.
 
Home gas alarm can be 24-hour real-time detection of combustible gas leak concentration, when the instrument reaches a preset value, the alarm will immediately issue an acoustic and optical alarm signal, but also linkage solenoid valve suction to close the gas valve.
 
In addition, the gas leak alarm with networking capabilities can also be pushed to the user through the phone, SMS, APP alarm information, the user can achieve remote valve shutdown, remote silencing and other operations, always guard the safety of the family gas.